Low Price Straight Line Double Edging Glass Machine

   FSM2025BL glass double straight edging  machine is the FOLGA newl generation developed product, with economic, efficient, high precision and reliable safety, whcih id  suitable for various specifications of the flat glass, ordinary laminated glass, Low-e film removing glass ,even more suitable for batch and mass production

FSM2025B Straight line double edging machine configuration from

I. Main technical data
1, Glass thickness: 3~25 mm
2, Min. Processed size: 250 mm
3, Max. Processed size: 2500mm
4, Max. Hemline grinding: 5mm(single line)
5, Max. Arris grinding: 3mm
6, speed: 1~6.5 m/min, request achieve the best polishing effect 1, 2, 3
1, when the grinding thickness is 4mm-8mm, speed: 3m/min
2, when the grinding thickness is 10mm-12m, speed: 2.3m/min
3, when the grinding thickness is 15mm-19mm, speed: 1.2m/min
7, slide grinding head section speed: 700 mm/min
8, working height: 900mm
9, overall size: 4900X3900X1700mm
10, Voltage/frequency: 380V/50Hz
11, compress air: ≥0.6Mpa
12, Air blowing rate: 1320 m3/Min
13, water pump output volume: 400L/hX2
14, Total power: 49Kw


II Main Structure:
·Flange adopt double Ball strew and straight line guiding rail, resetting well.
·Grinding head planker adopt high precision double V guiding rail, running stable, small shaking.
·Polishing adopt manual and Pneumatic half auto compensate.
·Upper angle of chamfer adopt ball screw and straight line guiding rail, Accurate positioning.
·Compaction frame auto lifting.
·Master drive adopt mechanism frequency conversion speed regulation, main driving axle upper place, easy change belt and maintain.
·Glass transmit adopt annular timing belt and pneumatic locating device, transfer stable, exactly fixed position.
·Adopt human interface and PLC control system, easy operate


III. Quality standard
1,processing glass quality requirement:
1)flat glass depth of parallelism error less than 3mm
2)flat glass thickness error less than 0.1mm
2,machine acceptance level:
     1)sub tense depth of parallelism error: ≤0.2mm/m;
     2)glass diagonal error: ≤0.5 mm/m;
3)average glass polishing surface
4)Other requirement: hemline, average bevel edges; average polishing brightness, without scratch, broken edges, and linen finish; machine operating without noise. Stable.

Some details: