Wire rope copper clad machine
Application:
The machine is single-package vertical machine, the package belt (mica tape, tissue tape, aluminum foil, polyester film, etc. ) through the turntable rotation, around wrapped in the core line, with a single around the header. Is mainly used for wires, power cables, control cables, fiber optic cable and other insulation core wound package.
It is used for high frequency date cables such as DVI/HDMI/ATA/SATA/DP and completing heating and self adhesion and self adhesion process for hot shrink belt synchronously.
Remarks
Supply-side required dates and docunments(a&b provide within 7 working days after signed the contract, others attcheh when delivery)
A. Full set of equipment installation layout.
B. Water, electricity and gas supply requirements and the amount of interface.
Equipment consumables and wearing parts lists, grades and their origin, vulnerable parts of the provision of spare parts map.
Control components and electrical specifications, models list, Converter Manual.
Electrical schematics, product manual, the ultimate test books, machine operation and maintenance manuals.
Packing List.
Supply-side should provide the service as below: (after deliveryed the machine)
To arrange assistance for installation, adjustment and operating test.
Technician arranged to be guided by supplier when operating the machine
Demand-side should providing facilities and the preparation projects as below: (After deliveryed the machine)
Power source, water source, compressed-air line and related project
Not listed connector device.
Needed materials for product testing
Application:
The machine is single-package vertical machine, the package belt (mica tape, tissue tape, aluminum foil, polyester film, etc. ) through the turntable rotation, around wrapped in the core line, with a single around the header. Is mainly used for wires, power cables, control cables, fiber optic cable and other insulation core wound package.
It is used for high frequency date cables such as DVI/HDMI/ATA/SATA/DP and completing heating and self adhesion and self adhesion process for hot shrink belt synchronously.
Remarks
Supply-side required dates and docunments(a&b provide within 7 working days after signed the contract, others attcheh when delivery)
A. Full set of equipment installation layout.
B. Water, electricity and gas supply requirements and the amount of interface.
Equipment consumables and wearing parts lists, grades and their origin, vulnerable parts of the provision of spare parts map.
Control components and electrical specifications, models list, Converter Manual.
Electrical schematics, product manual, the ultimate test books, machine operation and maintenance manuals.
Packing List.
Supply-side should provide the service as below: (after deliveryed the machine)
To arrange assistance for installation, adjustment and operating test.
Technician arranged to be guided by supplier when operating the machine
Demand-side should providing facilities and the preparation projects as below: (After deliveryed the machine)
Power source, water source, compressed-air line and related project
Not listed connector device.
Needed materials for product testing
| Machinry type | TZ-630Single-layer | TZ-800Single-layer |
| Applicable wire diameter | φ0.6mm-φ15mm | φ0.6mm-φ15mm |
| Around the package type | Concentric around the bag | Concentric around the bag |
| Pad wire diameter | ODφ250-350mm;Inside holeφ50mm | ODφ250-350mm;Inside holeφ50mm |
| Taping tension | Adjustment by specially-made spring | Adjustment by specially-made spring |
| Pay-off line axis | Customer self-made | Customer self-made |
| Take-up line axis | φ630mm | Φ800mm |
| Take-Wheel Drive | φ400mm | φ400mm |
| motor power | Three-phase 380V 2HP Frequency Control | Three-phase 380V 2HP Frequency Control |
| Towing power | 0.75KW Geared Motors | 0.75KW Geared Motors |
| Tapping rotation speed | 2500rpm | 2500rpm |
| Take-up line type | Take-Torque Motor | Take-Torque Motor |
