Cutter grinder(KXM-10C)
Type KXM-10C cutter sharpener is applicable to grind milling cutter of all kinds of diameter, shapers and angles for die sinker, also to die pin corresponding to the miller according to die sinker scale, it has ability of grinding turning tool, drill. So it is an necessary equipment in using die sinker with excellent figuration, new structure and good application.
Specifications
Cup wheel diameter-thickness-bore: 4" x 2" x 3/4"
Spindle speed: 5200 rpm
Collet capacity: 1/8" to 5/8"
Longitudinal traverse of index head carrier: 5-1/2"
Fine longitudinal adjustment travel of index head carrier: 3/4"
Taper angle: 0 to 180 degrees
Negative taper angle: 0 to 52 degrees
Relief angle: 0 to 44 degrees
Motor: 1/4HP, 3400 rpm
Power 220V/110V, single phase
Net weight:? 0Kg
Overall dimensions: 48x39x36.5 cm/18" x 14" x 14"
Collets: 1/8". 3/16", 1/4", 5/16", 3/8" 1/2", 5/8"
Stone wheel: 4" x 2" x 3/4"
Optional diamond wheel: 4" x 2" x 5/8"
Type KXM-10C cutter sharpener is applicable to grind milling cutter of all kinds of diameter, shapers and angles for die sinker, also to die pin corresponding to the miller according to die sinker scale, it has ability of grinding turning tool, drill. So it is an necessary equipment in using die sinker with excellent figuration, new structure and good application.
Specifications
Cup wheel diameter-thickness-bore: 4" x 2" x 3/4"
Spindle speed: 5200 rpm
Collet capacity: 1/8" to 5/8"
Longitudinal traverse of index head carrier: 5-1/2"
Fine longitudinal adjustment travel of index head carrier: 3/4"
Taper angle: 0 to 180 degrees
Negative taper angle: 0 to 52 degrees
Relief angle: 0 to 44 degrees
Motor: 1/4HP, 3400 rpm
Power 220V/110V, single phase
Net weight:? 0Kg
Overall dimensions: 48x39x36.5 cm/18" x 14" x 14"
Collets: 1/8". 3/16", 1/4", 5/16", 3/8" 1/2", 5/8"
Stone wheel: 4" x 2" x 3/4"
Optional diamond wheel: 4" x 2" x 5/8"
| No. | Main Technical Parameter | MM | INCH | |
| 1 | Wheel | Diameter | 100 | 4 |
| Thickness | 50 | 2 | ||
| Hole size | 20 | 3/4 | ||
| 2 | Spindle sp | 5200rpm | 5200rpm | |
| 3 | Collet clamping diameter range | 3-16 | 1/8-5/8 | |
| 4 | Tool post longitudinal travel | 140 | 5-1/2 | |
| 5 | Tool post longitudinal mircro adjustment | 18 | 3/4 | |
| 6 | Spindle post longitudinal mircro adjustment | 8 | 1/3 | |
| 7 | Grinding taper range | 0°~180° | ||
| 8 | Grinding negative angle range | 0°~52° | ||
| 9 | Grinding relief range | 0°~44° | ||
