Heat Exchanger/Heater for Drying Tea/Heat Exchanger for textile machinery/Fin tube Heat Exchanger/Heater for Stenter Frame Range/Heater for hot air stenter, Heat Setting Stenter
Technical requirements
1. The heat exchanger is made of seamless carbon steel tube GB8163 ofφ 18X2.0-38mm with extruded aluminum fin;
2. Surface tube NO: 17, row NO: 5;
3. Design pressure: 1.5MPa, design temperature: 300C;
4. Connector: DN65(76 connecting tube);
5. Fin height: 10mm, fin distances: 3mm, fin thickness: 0.3mm;
6. Material: All is made of carbon steel except fin is aluminum;
7. Surface treatment: Srayed with high temperature silver powder;
8. Making standard: GB/T14296-93.
OEM is welcomed.
Technical requirements
1. The heat exchanger is made of seamless carbon steel tube GB8163 ofφ 18X2.0-38mm with extruded aluminum fin;
2. Surface tube NO: 17, row NO: 5;
3. Design pressure: 1.5MPa, design temperature: 300C;
4. Connector: DN65(76 connecting tube);
5. Fin height: 10mm, fin distances: 3mm, fin thickness: 0.3mm;
6. Material: All is made of carbon steel except fin is aluminum;
7. Surface treatment: Srayed with high temperature silver powder;
8. Making standard: GB/T14296-93.
OEM is welcomed.
