The machine tool is suitable for the batch, small batch and individual production of cylindrical gear and worm gear, suitable for roll cutting spline shaft in a certain range of parameters.
The machine tool feartures good rigidness and extremely smal thermal deformation, enabling high-speed cutting and load cutting, with a very high prodution efficiency.
The machine tool is convenient for adjustment, with auto stop mechanism, as well as reliable safe mechanism and auto lubrication system.
The machine tool feartures good rigidness and extremely smal thermal deformation, enabling high-speed cutting and load cutting, with a very high prodution efficiency.
The machine tool is convenient for adjustment, with auto stop mechanism, as well as reliable safe mechanism and auto lubrication system.
| Max diameter of workpiece | with rear post 550mm without rear post 800mm |
| Max module of workpiece | 10mm |
| Min teeth of workpiece | Zmin/knt=8(*n:nember of cutter |
| Max machine width workpiece | 300mm |
| Max diameter and length of cutter | 180mm × 180mm |
| Diameler of changeable and axis of cutter | Φ22 Φ27 Φ32 Φ40 |
| Max rotary angle of headstock | ±60° |
| Dist between table and axis of cutter | Max 585mm Min 235mm |
| Dis between axis of workpiece and axis of cutter | Max 550mm Min 50mm |
| Dist between table and bearing of rear post | max: 600mm min: 400mm |
| Max axial shift length of cutter | 60mm |
| Step number and range of spindl speed | 8 step 40-200r.p.m |
| Range of axial step | 0.4 -4mm /table per turn |
| Machining precision | GB1095-88 6-6-7 |
| Dimensions(L×W×H) | 2765×1420×1850(mm) |
